May

198″ x 122″ x 31″ Used Okuma Double Column Universal Machining Center, Mdl. MCR-A5C 25-50, Year (2008) #C5035

626-444-0311

Specification

Full Description

Capacity:	198″ x 122″ x 31″
Travel
X-Axis Travel (table front/back):	198.82″
Y-Axis Travel (Horizontal Spindle) :	122.05″
Z-Axis Travel (Vertical RAM):	31.50″
Crossrail (Vertical Crossrail) :	39.37″
Effective Width Between Columns:	104.33″
Table to Spindle Nose:	0 – 64.96″
.
Table
Working Surface:	78.74″ x 188.97″ (W x L)
Maximum Load:	59,400 lbs
T-Slots
Height from Floor:	33.46″
.
Spindle
Spindle Speed
Taper Bore:	7/24 Taper No. 50
Bearing Diameter
.
Feed Rates
Rapid Traverse:	X – 98.43 fpm
	Y – 104.99 fpm
	Z – 65.62 fpm
Cutting Feed Rate:	0.04 – 394 ipm
Crosstail Traverse
.
ATC
Tool Shank:	MAS BT50
Tool Magazine Capacity:	50 Tools
Maximum Tool Diameter:	With Adjacent Tools – 5.31″
	Without Adjacent Tools – 9.06″
Maximum Tool Length:	15.75″
Maximum Tool Weight:	55 lbs
.
Motor
Crossrail Vertical Drive:	6.1 x 2 H.P.
.
Power
Electrical Power Supply:	64 H.P.
Compressed Air Flow Rate:	0.5 Mpa or more
.
Size
Height:	237″
Floor Space:	268″ x 494″
Weight:	105,600 lbs

Leave a comment