Customer Success: Clausing Metosa Engine Lathe for Pipe Threading

No CommentsCLAUSING, Lathes

When it comes to machining, precision and reliability are key. One of our recent customers was searching for a high-quality engine lathe to improve their pipe threading process, and they found the perfect solution in the Used Clausing Metosa Engine Lathe. This machine helped them increase efficiency and achieve exceptional accuracy in their work. Meet […]

Brand New Clausing Geared Head Engine Lathe 13″/18″ x 40″ Brand New Clausing Geared Head Engine Lathe, Mdl. 8027J, Fully-geared headstock with 12 spindle speeds from 40 – 2500 rpm 13″, 16 spindle speeds from 25 – 2000 rpm 15″, All headstock gears are hardened and ground, Headstock shafts are splined and turn on anti-friction bearings, Spindle bearings, gears and shafts are lubricated by a forced lubrication system, A broad range of Feed and Thread selections are available by using three selector levers and an 8-position rotary dial, Precision Gamet spindle bearings, Cross slide runs along a dovetail guide, Bed wipers and an apron mounted one-shot lubrication pump, The cast iron apron is totally enclosed and splash bath lubricated, Gap Bed with easy-to-remove bed blocks, Equipped with chuck guard, full splash guard and leadscrew cover, Clutch drive, reverse leadscrew with spindle turning for faster thread cutting, Extra wide bed provides accuracy and minimal wear, Coolant System, Inch Threading Dial, Two 3MT Centers, Center Bushing, Accuracy Chart, Set of Wrenches and Keys, Parts and Instruction Manuals, State-of-the-art AC Spindle Drive features surface mount technology to give compact size and high reliability, 1 Year Warranty, Three headstock gear ranges a wide spread of constant power – 33 to 1 – better than most CNC lathes, Electromagnetic Spindle Brake, #SM8027J

No CommentsCLAUSING, Engine Lathe, GEARED HEAD

Brand New Clausing Geared Head Engine Lathe 13″/18″ x 40″ Brand New Clausing Geared Head Engine Lathe, Mdl. 8027J, Fully-geared headstock with 12 spindle speeds from 40 – 2500 rpm 13″, 16 spindle speeds from 25 – 2000 rpm 15″, All headstock gears are hardened and ground, Headstock shafts are splined and turn on anti-friction […]

Tags: #SM8027J, 1 Year Warranty, 16 spindle speeds from 25 - 2000 rpm 15", A broad range of Feed and Thread selections are available by using three selector levers and an 8-position rotary dial, Accuracy Chart, All headstock gears are hardened and ground, Bed wipers and an apron mounted one-shot lubrication pump, Brand New Clausing Geared Head Engine Lathe 13"/18" x 40" Brand New Clausing Geared Head Engine Lathe, Center Bushing, Clutch drive, Coolant System, Cross slide runs along a dovetail guide, Electromagnetic Spindle Brake, Equipped with chuck guard, Extra wide bed provides accuracy and minimal wear, full splash guard and leadscrew cover, Fully-geared headstock with 12 spindle speeds from 40 - 2500 rpm 13", Gap Bed with easy-to-remove bed blocks, gears and shafts are lubricated by a forced lubrication system, Headstock shafts are splined and turn on anti-friction bearings, Inch Threading Dial, Mdl. 8027J, Parts and Instruction Manuals, Precision Gamet spindle bearings, reverse leadscrew with spindle turning for faster thread cutting, Set of Wrenches and Keys, Spindle bearings, State-of-the-art AC Spindle Drive features surface mount technology to give compact size and high reliability, The cast iron apron is totally enclosed and splash bath lubricated, Three headstock gear ranges a wide spread of constant power - 33 to 1 - better than most CNC lathes, Two 3MT Centers

20″ Brand New Clausing 2 Speed Floor Drill Press, Mdl. 2276, 150 to 2000 rpm… speeds to drill large holes, small holes to spot face, counterbore and ream., A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling., Greater capacity, too, with Clausing LOW/HIGH, production rated 1-1/8″ in cast iron, 7/8″ in steel with optional power feed., Heavy-duty precision head… all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads., 3 MT spindle… with 6-1/2″ travel, 2-1/2″ diameter quill and micrometer depth stop., 4″ column with 1/2″ thick wall for great rigidity, accuracy., Precision ground 22″ x 19″ oil trough table, handles large parts and fixtures, Three V-belts and a cog belt transmit positive power to the spindle., Variable and spindle pulleys are cast iron, fully machined and balanced., #SM2276

No CommentsCLAUSING, DRILL PRESS, FLOOR

20″ Brand New Clausing 2 Speed Floor Drill Press, Mdl. 2276, 150 to 2000 rpm… speeds to drill large holes, small holes to spot face, counterbore and ream., A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling., Greater capacity, too, with Clausing LOW/HIGH, production […]

Tags: #SM2276, 150 to 2000 rpm... speeds to drill large holes, 2-1/2" diameter quill and micrometer depth stop., 20" Brand New Clausing 2 Speed Floor Drill Press, 3 MT spindle... with 6-1/2" travel, 4" column with 1/2" thick wall for great rigidity, 7/8" in steel with optional power feed., A flip of the switch changes from low range to high range, Accuracy, counterbore and ream., fully machined and balanced., Greater capacity, handles large parts and fixtures, Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads., Mdl. 2276, perfect for production applications with quick change tooling., Precision ground 22" x 19" oil trough table, production rated 1-1/8" in cast iron, small holes to spot face, Three V-belts and a cog belt transmit positive power to the spindle., too, Variable and spindle pulleys are cast iron, with Clausing LOW/HIGH

13″/18″ x 36″ Used Clausing Colchester Geared Head Removable Gap Bed Lathe, Mdl. 645, 8″ 3 Jaw Chuck, KDK Tool Holder, Splash Guard, Coolant Pump, Collet Closer, On/Off Switch, Work Light, #A4684

No CommentsCLAUSING, COLCHESTER, Gap Bed Lathe, GEARED HEAD, REMOVABLE

13″/18″ x 36″ Used Clausing Colchester Geared Head Removable Gap Bed Lathe, Mdl. 645, 8″ 3 Jaw Chuck, KDK Tool Holder, Splash Guard, Coolant Pump, Collet Closer, On/Off Switch, Work Light, #A4684 626-444-0311 http://www.sterlingmachinery.com/12545/Clausing+645/ Specification Full Description Capacity: 13″/18″ x 36″ Swing Over Bed: 13″ Swing Over Cross Slide: 8″ Distance Between Centers: 36″ Swing […]

Tags: 13"/18" x 36" Used Clausing Colchester Geared Head Removable Gap Bed Lathe, 8" 3 Jaw Chuck, Collet Closer, coolant pump, KDK Tool Holder, Mdl. 645, On/Off Switch, Splash Guard, Work Light

20″ Used Clausing Floor Drill Press, Mdl. 2276, Table Elevating Mechanism, Foot Pedal- ON/OFF, Drum Switch, #A4596

No CommentsCLAUSING, Floor Drill, USED

20″ Used Clausing Floor Drill Press, Mdl. 2276, Table Elevating Mechanism, Foot Pedal- ON/OFF, Drum Switch, #A4596 626-444-0311 http://www.sterlingmachinery.com/12352/Clausing+2276/ Specification Full Description Swing: 20″ Table Size (T-Slotted): 22″ x 19″ Spindle Speeds (Variable): 150 – 2,000 RPM Spindle Quill Travel: 6-1/2″ Spindle Taper: #3 MT Hand Feed Capacity: 1-1/4″ Spindle to Base: 43.37″ Throat: 10″ […]

Tags: 20" Used Clausing Floor Drill Press, Drum Switch, Foot Pedal- ON/OFF, Mdl. 2276, Table Elevating Mechanism